| Note |
|---|
The Wally Dolly as it is known allows an easy setup of a camera dolly for any cameras within the MCASI Store fleet. |
It comes contained within a ‘carry bag' which is easy to transport. It is then easily constructed to provide you with a 3m track length. Base Kit shown.
| Info |
|---|
A workshop will be required before your Group can Book it. Please include this equipment into your Risk Assesment. Minimum of 3 people for workshop required. |
| Note |
|---|
Please Note, with the setup of the 6 x 1m Tracks, it must be done with the ‘Tracks’ sitting laying on the Black Pads provided within the Kit situated on the ground. With the Tracks laying on the Pads, they can be screwed together or unscrewed where the Dolly will be used. Do Not screw or unscrew the Track Rods whilst holding them up off the ground. |
3m Track length ‘Base Kit’ shown
2 sets of 3m extensions
| Note |
|---|
Please follow the same setup for the Tracks as explained above. |
In addition to the Base Kit, there is further ‘3m Track extension' to add to the above Base Kit.
This will provide you with 6m of Dolly movement for your ‘Shot’.
An ample distance of Track for that possible “Dolly-Zoom” shot.
2 x Low Boy Camera mount.
This camera mount is for Third Year cameras only as the ‘Bowl Mount’ is compatible.
The Low Boy camera mount attaches directly onto the Wally Dolly in seconds and has a 100mm bowl suitable for most pan and tilt heads.
For a more descriptive video on its setup Click on the video below.
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|