Page Comparison

Slating is the process of marking the clapperboard, and calling out during recording, a certain sequence of numbers that indicate the Scene, Slate, and Take that is being recorded. The purpose of the number sequence is to identify each shot and audio file so they can be labelled and synched correctly in post-production.

This particular Slating/Clapperboard procedure can be used for both drama and documentary productions. It is called the Cumulative Setup/Take system, often referred to as the 'Australian System'.

Clapper/Slating Shots PDF

Filling in the Clapperboard/Slate
1.	Title of Production.
2.	Scene number according to script - accurate and correspond across all Report Documents.
3.	Slate - The Slate is changed for each new camera set-up, or lens change if appropriate (in other words, every time the frame changes). It rolls from 1 to infinity, with first slate number for each day flowing on from last slate number of previous day.
4.	Take - Takes start at 1 and continue for as many as is required.
5.	Name of Director - if 2nd Unit is shooting, then name of 2nd Unit Director.
6.	Name of Camera Person - if 2nd Unit is shooting, then name of 2nd Unit Camera Person.
7.	Date of current Shoot Day.
8.	MOS - circle if no sound is being recorded.
9.	DAY/NITE - circle for Day or Night.
The Order and Words for Calling the Slate
1.	1st AD - Turn Over (or Roll sound)
2.	SOUND - Speed (or Sound Rolling)
3.	CAMERA ASSISTANT - Slate 1, Take 1 Only two numbers are called by the Camera Assistant: Slate Take The Scene number is noted on the clapper board but is NOT called. Scene number is also noted by the appropriate crew members on the Camera Report and the Continuity Report in the box labelled ‘Scene’. All notes for audio is kept by the Sound Recordist on the Sound Report.
4.	CAMERA - Mark It
5.	CAMERA ASSISTANT - clap the sticks
6.	CAMERA - Frame and/or Set
7.	DIRECTOR (or 1st AD on some occasions) - Action
8.	DIRECTOR (only Director) - Cut

Tip

title	Slate like a Pro!

25 tips to help you slate like a pro!

Note

title	Compare Notes

It is crucial that Sound, Camera, and Continuity departments compare notes a few times on every shoot day to ensure all Scene, Slate, and Take numbers are accurate and correspond across all Report Documents

Below are working examples for marking and calling the slate

First camera set-up on the first day (let's say the first scene to be shot is Scene 5), and first take of that set-up, will be marked as:

Scene 5 - Slate 1 - Take 1

and called as:

Slate 1, Take 1 (or just 1.1 for speed and brevity)

Next take would then be marked:

Scene 5 - Slate 1 - Take 2

and called as:

Slate 1, Take 2

If that is the last take of that set-up, and we have a new set-up (meaning the camera has been moved, or there has been a lens change - the frame has changed), this will be marked:

Scene 5 - Slate 2 - Take 1

and called as:

Slate 2, Take 1

Lets say there is then a Scene change to Scene 7, the next slate will be marked:

Scene 7 - Slate 3 - Take 1

and called as:

Slate 3, Take 1

If this is the last set-up of the day, the first slate and take of the next day will be marked (still filming Scene 7):

Scene 7 - Slate 4 - Take 1

and called as:

Slate 4, Take 1

Additional Unscripted Scenes Added During a Shoot

If an unscripted scene is to be inserted during the shoot - let's say between Scene 5 and 6, it is labelled as 5A.

Additional unscripted scenes are then be labelled 5B, 5C, etc.

If the unscripted scene is to be inserted between a scene that is already split (i.e. 5A and 5B), the inserted scene is called 5AA.

Scenes Being Shot by 1st Unit and 2nd Unit

When a scene is shot by both a 1st Unit and 2nd Unit (let's say it is Scene 8), then 2nd Unit clapper would be marked:

Scene 8 - Slate X - Take 1

*Note that the Slate has been marked MOS as it is being recorded without sound, which is the case for most 2nd Unit shots

If next shot is a new set-up, it will be marked as:

Scene 8 - Slate X1 - Take 1

If audio is recorded, the slate will be called as:

Slate X1, Take 1

Scenes Shot with Multiple Cameras

Ideally the clapper is placed so that every camera can see it.

If that is not possible, the clapper must slate each camera in turn, calling:

Slate 4, Take 1 Camera A (wait for Camera Unit to "Mark It" call then close the clapper)

then move to where Camera B can see the clapper and call:

Slate 4 Take 1 Camera B (wait for Camera Unit to "Mark It" call then close the clapper)

Info

title	Get IN TOUCH

Contact CPSU Staff

Filter by label (Content by label)

showSpace	false
cql	label in ( "cinematography" , "camera" , "postproduction" )

Page Comparison

Versions Compared

Old Version 13

New Version 14

Key

This particular Slating/Clapperboard procedure can be used for both drama and documentary productions. It is called the Cumulative Setup/Take system, often referred to as the 'Australian System'.

Clapper/Slating Shots PDF

Filling in the Clapperboard/Slate

1.

Title of Production.

2.

Scene number according to script - accurate and correspond across all Report Documents.

3.

Slate - The Slate is changed for each new camera set-up, or lens change if appropriate (in other words, every time the frame changes). It rolls from 1 to infinity, with first slate number for each day flowing on from last slate number of previous day.

4.

Take - Takes start at 1 and continue for as many as is required.

5.

Name of Director - if 2nd Unit is shooting, then name of 2nd Unit Director.

6.

Name of Camera Person - if 2nd Unit is shooting, then name of 2nd Unit Camera Person.

7.

Date of current Shoot Day.

8.

MOS - circle if no sound is being recorded.

9.

DAY/NITE - circle for Day or Night.

The Order and Words for Calling the Slate

1.

1st AD - Turn Over (or Roll sound)

2.

SOUND - Speed (or Sound Rolling)

3.

CAMERA ASSISTANT - Slate 1, Take 1

Only two numbers are called by the Camera Assistant:

Slate

Take

The Scene number is noted on the clapper board but is NOT called.

Scene number is also noted by the appropriate crew members on the Camera Report and the Continuity Report in the box labelled ‘Scene’.

All notes for audio is kept by the Sound Recordist on the Sound Report.

4.

CAMERA - Mark It

5.

CAMERA ASSISTANT - *clap the sticks*

6.

CAMERA - Frame and/or Set

7.

DIRECTOR (or 1st AD on some occasions) - Action

8.

DIRECTOR (only Director) - Cut

25 tips to help you slate like a pro!

It is crucial that Sound, Camera, and Continuity departments compare notes a few times on every shoot day to ensure all Scene, Slate, and Take numbers are accurate and correspond across all Report Documents

Below are working examples for marking and calling the slate

First camera set-up on the first day (let's say the first scene to be shot is Scene 5), and first take of that set-up, will be marked as:

Scene 5 - Slate 1 - Take 1

and called as:

Slate 1, Take 1 (or just 1.1 for speed and brevity)

Next take would then be marked:

Scene 5 - Slate 1 - Take 2

and called as:

Slate 1, Take 2

If that is the last take of that set-up, and we have a new set-up (meaning the camera has been moved, or there has been a lens change - the frame has changed), this will be marked:

Scene 5 - Slate 2 - Take 1

and called as:

Slate 2, Take 1

Lets say there is then a Scene change to Scene 7, the next slate will be marked:

Scene 7 - Slate 3 - Take 1

and called as:

Slate 3, Take 1

If this is the last set-up of the day, the first slate and take of the next day will be marked (still filming Scene 7):

Scene 7 - Slate 4 - Take 1

and called as:

Slate 4, Take 1

Additional Unscripted Scenes Added During a Shoot

If an unscripted scene is to be inserted during the shoot - let's say between Scene 5 and 6, it is labelled as 5A.

Additional unscripted scenes are then be labelled 5B, 5C, etc.

If the unscripted scene is to be inserted between a scene that is already split (i.e. 5A and 5B), the inserted scene is called 5AA.

Scenes Being Shot by 1st Unit and 2nd Unit

When a scene is shot by both a 1st Unit and 2nd Unit (let's say it is Scene 8), then 2nd Unit clapper would be marked:

Scene 8 - Slate X - Take 1

If next shot is a new set-up, it will be marked as:

CAMERA ASSISTANT - clap the sticks