Rigging - Wally-Dolly Track
- Adem Kerimofski
- Murray Basham
- Austin Russell
- Paul Indaimo
The Wally Dolly is an incredibly useful and dynamic dolly system, allowing for smooth and precise tracks for your production. The stock kit is 3 metres in length however this can be extended with optional extension kits, making the length in excess of 6 metres. It also comes with a low rider attachment, allowing for the camera to sit very low to the ground whilst performing a dynamic track.
A compliance workshop MUST be undertaken by at least 3 students in your group to be able to use this dolly. The Director of Photography and 1st Camera Assistant must be trained in this gimbal.
Wally Dolly Manual | 
|
|---|---|
Wally Dolly Promo Video |
Please Note, with the setup of the 6 x 1m Tracks, it must be done with the ‘Tracks’ laying on the Black Pads provided within the Kit situated on the ground. With the Tracks laying on the Pads, they can be screwed together or unscrewed where the Dolly will be used.
Do Not screw or unscrew the Tracks whilst holding them up off the ground.
3m Track length ‘Base Kit’ shown
2 sets of 3m extensions
Please follow the same setup for the Tracks as explained above.
In addition to the Base Kit, there is further ‘3m Track extension' to add to the above Base Kit.
This will provide you with 6m of Dolly movement for your ‘Shot’.
An ample distance of Track for that possible “Dolly-Zoom” shot.
2 x Low Boy Camera mount.
This camera mount is for both 2nd and 3rd Year cameras, as the ‘Bowl Mount’ is compatible.
The Low Boy camera mount attaches directly onto the Wally Dolly in seconds and has a bowl suitable for most pan and tilt heads.
For a more descriptive video on its setup Click on the video below.