Formatting the CFExpress Type A Card

Sony FX30 - Formatting Media

Setting up SLOG and 10-bit Colour

Sony FX30 - Slog Filming

Setting a Correct Exposure

Sony FX30 - Exposure Tips & Tricks

Setting up Timecode with the Deity TC-1

Sony FX30 - Timecode Setup with the Deity TC-1

Deity TC-1. Generating Timecode

Deity TC-1 Timecode Generator information

Image Removed

Image Removed

Image Removed

Image Removed

TIMECODE ON THE FX30

The Deity TC-1 Timecode is mounted on the FX30

using the provided ‘Cold Shoe mount’ with the TC-1 in Camera bag.

The connector from the Deity TC-1 then plugs into the USB-C socket of the camera.

To do so ‘Open’ the door (as shown) to access the interface.

The Deity TC-1 Timecode is mounted on the FX30

using the provided ‘Cold Shoe mount’ with the TC-1 in Camera bag.

Go to MENU then Shooting > TC/UB

Setup this area of the camera as shown

Then plug in the USB-C connector to camera

With the TC-1 now plugged in to the FX30, with TC/UB setup correctly, you will see the EXT-LK (shown circled in Yellow to the Left).

the Deity TC-1

Troubleshooting - Picture is on Shinobi Monitor but not on the FX30 Viewfinder

If you are only seeing a picture on the Atomos Shinobi 5 monitor but not on the FX30, please follow the below steps to ensure that the external output is assigned correctly:

Go to MENU then Setup and External Output (11)

Ensure that HDMI Info. Display is set to off.

You should then notice your menu pop back up on the Sony FX30 monitor.

The FX30 has two output options:

The ideal option is for the menu to be seen on the FX30 viewfinder. The picture output will be sent to the Shinobi 5 monitor.

Alternatively, setting HDMI Info. Display to on will send the menu and picture to the Shinobi 5 monitor. This will however shut off ALL picture to the FX30 viewfinder.