...
...
| Patch each Microphone into the cameras 2 InputsHand held Mic - Audio CH-1 (INTEXT)On board Mic (Directional) - Audio CH-2 (SOTsEXT)Internal Mic - Audio Channel 3 (INT) (BU)Internal Mic - Audio Channel 4 (INT) (BU) | |||||
 | ||||||
 | ||||||
| The Camera menu settings should be patched accordinglyAudio Input | |||||
| Audio Output | |||||
| ||||||
| Routing of the Audio in the CameraHand held Mic - Audio CH-1 (EXT)On board Mic (Directional) - Audio CH-2 (EXT)(As this microphone requires voltage to operate, ensure that Mic +48v is selected) Auto indicates Automatic Gain. Not used for Ch1 - I/V MicInternal Mic - Audio Channel 3 (INT) (BU)Internal Mic - Audio Channel 4 (INT) (BU)
| |||||
| The Camera menu settings has both Input and Output - for Audio | |||||
| Audio INWithin this part of the Menu, select 'CH2 EXT Input' as Input 2.CH3 as Internal Mic Ch4 as Internal Mic | |||||
| Audio Routing of Ch2 EXT | |||||
| Audio Output of the Menu.This display shows how the cameras monitoring headphones are being fed.In this case as shown CH1 to the Left and CH2 to the Right headphones. | |||||
| Monitoring Output to Headphones.If you need to change the way monitoring is heard in the headphones, then select Monitor CH andchoose CH1 only, this will allow you to hear the Interview mic in both Left and Right part of the headphones. | |||||
Related Articles
| ||||||
...