This is a general show checklist for lighting. Shows may have specific requirements that need to be added to this list.
Your checklist should take the form of a table with a separate column for each show. You should tick off each task as you complete it.
Pre-show
- Turn on dimmers, movers and LED strips.
- Conduct a lamp and focus check - bring up each light individually to ensure it works and hasn't been knocked, refocused or repatched.
- Check the movers and LED strips.
- Specifically focus check any lamps on the floor.
- Play through a few cues to ensure playback is functioning correctly.
- Five minutes before opening the house - blackout check, clear live, and go into preset.
Post-show
- Clear and release all.
- Turn of all LED lighting via the 6 GPO switches
- Turn off all 3 phase power
- Turn on house lights via the panel outside the bio box
- Fully shut down lighting laptop.
Add Comment