FD - Jam Sync Sony PXW-Z280

	TIME-CODE ‘JAM SYNCING’ SONY PXW- Z280 CAMERAS Ensure ALL CAMERAS are set to record at the exact same frame rate Locate Menu Button
	Menu >> System >> Rec Format >> Frequency - 50 File System - exFAT Codec - XAVC-L Video Format - 1920P 50 Aspect Ratio - 16:9
	Set all cameras to Free Run in the Timecode menu Menu >> Timecode >> Run >> Free Run
	Attach a BNC cable from Master Camera to one of the Slave cameras via their Time-Code input Master Camera Nominate a camera to be Master, usually Camera 1 used for the Recording. Master camera needs to have its Timecode switch to OUT as shown

	The first camera that needs to have its Timecode -Locked to the Master, needs to have its switch - set to 'Time-Code In' This camera is then known as 'Slave'.
	Set Time-Code on the Master camera using 24 Hour Time Menu >> Timecode >> Setting >> The picture shows the Setting of 13:40:59:00 in 24Hour notation. This is to show the time as being 1:40:59 PM in the traditional 12 Hour notation 24 Hour clock This form of Timecode allows a more accurate way in showing time for reference editing , compared to the 12Hour form.
	When Slave cameras receive the Time-Code signal via cable from the Master camera they will automatically lock/sync to the Master camera’s Time-Code Once Sync is completed repeat process for the second Slave camera Be Aware that it is not uncommon when using Jam syncing for cameras to fall a couple frames out of sync over an extended period of time This is caused by minor variations in camera speeds but even then would only account for being a few frames off over several hours
	When each SLAVE camera auto detect the incoming Time-Code signal they will display a note on the Left Bottom of screen ‘EXT-LK’ (External Time Code Lock)
Related Articles Page: FD - Jam Sync Sony PXW-Z280 (Screen Arts & Journalism) media management sonypmw300k sonypmw300 noongar dandjoo Page: FD - Audio Management (Camera) (Screen Arts & Journalism) media management fremantle sonypmw300k sonypmw300 Page: FD - Multi-Cam Editing (Screen Arts & Journalism) fremantle multicam Page: PrP - Additional Processes - Multi-Cam Editing (Screen Arts & Journalism) fremantle multicam

TIME-CODE ‘JAM SYNCING’ SONY PXW- Z280 CAMERAS

Ensure ALL CAMERAS are set to record at the exact same frame rate

Locate Menu Button

Menu >> System >> Rec Format >> Frequency - 50

File System - exFAT

Codec - XAVC-L

Video Format - 1920P 50

Aspect Ratio - 16:9

Set all cameras to Free Run in the Timecode menu

Menu >> Timecode >> Run >> Free Run

Attach a BNC cable from Master Camera to one of the Slave cameras via their Time-Code input

Nominate a camera to be Master, usually Camera 1 used for the Recording.

Master camera needs to have its Timecode switch to OUT as shown

The first camera that needs to have its Timecode -Locked to the Master, needs to have its switch - set to 'Time-Code In'

This camera is then known as 'Slave'.

Set Time-Code on the Master camera using 24 Hour Time

Menu >> Timecode >> Setting >>

The picture shows the Setting of 13:40:59:00 in 24Hour notation.

This form of Timecode allows a more accurate way in showing time for reference editing , compared to the 12Hour form.

When Slave cameras receive the Time-Code signal via cable from the Master camera they will automatically lock/sync to the Master camera’s Time-Code

Once Sync is completed repeat process for the second Slave camera

Be Aware that it is not uncommon when using Jam syncing for cameras to fall a couple frames out of sync over an extended period of time

This is caused by minor variations in camera speeds but even then would only account for being a few frames off over several hours

When each SLAVE camera auto detect the incoming Time-Code signal they will display a note on the Left Bottom of screen ‘EXT-LK’ (External Time Code Lock)

Related Articles