Versions Compared

Old Version 6

changes.mady.by.user Joachim Strand

Saved on

compared with

New Version Current

changes.mady.by.user Murray Basham

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Note
titleStudio Lighting

This Studio has very limited Lights available on the 'Fixed Grid' in the ceiling. The moving of any Light within this Studio is NOT permitted without speaking first with the MCASI Store or CPSU Manager


Studio 101 includes 12 channels of dimmable light 

Dimmer control is provided by a simple to operate ShowTec Fademaster 16 control panel on the desk by the computer.

User Manual


Out the back is a Jands WMX dimmer and patch cables

  • The grid lights can be moved

    and

    after consultation with MCASI Store Staff or the existing Lights in the Grid can be patched as needed for

     production

    production lighting or to provide simple dimmable light for a screening or presentation.

  • Spot lights can be used to light the presenter and white board for a presentation or class

  • Soft lights can be used to provide lighting for audience or mood lighting for a screening

    There are limited amount of Lights available in the Grid, so speak to a MCASI Store Production Specialist.

  • Consider then, ground based Lighting Kit to assist.

For simple dimmable lights for class presentation follow these steps

Switch on the main dimmer power out the back

Slide up faders 1, 2 or 3. These are most likely patched and ready for mood lighting for a screening


Note
titleIS IT WORKING?
Lights should work. If they don't check the patching on the dimmer or ask for
some help
assistance from a Production Support Specialist. Through the MCASI Store.


Patching Lights to the Dimmer  

Look at the grid to find the lights you like and note their grid power number.

Number 3 soft light is  good for dimmable lighting for class or video screening

Grab patch cable Number 3

Plug the chosen cable into the Jands WMX Dimmer - Note the Number on the Dimmer Panel

Slide up the numbered fader corresponding to the Dimmer Panel Number from the previous step, to the light level you desire.

Filter by label (Content by label)
cqllabel in ( "facilities" , "studio" , "studio101" )

...