Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 4
TOP PANEL  | - Input select knob: Selects the input to be used for monitoring. Analogue 1 is a balanced input, Analogue 2 is an unbalanced input and Digital is an S/PDIF coaxial input.
- Master Volume Knob: This is the input level control. Start with this knob at the middle setting of 12 O'clock. If you turn this knob up too high, you may hear distortion.
- Headphone Volume Knobs: These knobs control the level of the individual headphone outputs. Turn these knobs all the way down before you plug headphones in.
|
|---|
FRONT PANEL | - Headphone output jacks: Four 1/4'' TRS headphone jacks are provided. One for each headphone output.
|
|---|
REAR PANEL | - Analog Input: Balanced 1/4" TRS analog left and right inputs. Use the left input for a mono, balanced source.
- Analog Input: Unbalanced, stereo, analog 1/4" TRS input. Connect the headphone output of your source here.
- Digital Input: Coaxial, S/PDIF digital input. This input will accept sample rates, 44.1 kHz, 48kHz, 88.2kHz and 96kHz, +/- 3%. It will accept 16 and 24 bit resolution.
- DC Power Supply Input: 12 volt, 1 Amp
|
|---|