Show checklist: sound

This is a general show checklist for sound. Shows may have specific requirements that need to be added to this list.

Your checklist should take the form of a table with a separate column for each show. You should tick off each task as you complete it.  

Pre-show

1. Turn on the equipment, following correct power-up procedure. 
2. Set all faders to the correct levels.
3. Check all stage speakers are functioning.
4. Play through several sound cues to check operation.
5. Check show relay to bio box and dressing rooms.
6. Begin house music just prior to doors opening.

Post-show

1. Fully shut down the sound laptop.
2. Turn off the equipment, following correct power-down procedure.