Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

Studio Lighting

This Studio has very limited Lights available on the 'Fixed Grid' in the ceiling. The moving of any Light within this Studio is NOT permitted without speaking first with the MCASI Store or CPSU Manager

Studio 101 includes 12 channels of dimmable light 

Dimmer control is provided by a simple to operate ShowTec Fademaster 16 control panel on the desk by the computer.

User Manual


Out the back is a Jands WMX dimmer and patch cables

  • The grid lights can be moved after consultation with MCASI Store Staff or the existing Lights in the Grid can be patched as needed for production lighting or to provide simple dimmable light for a screening or presentation.

  • There are limited amount of Lights available in the Grid, so speak to a MCASI Store Production Specialist.

  • Consider then, ground based Lighting Kit to assist.

For simple dimmable lights for class presentation follow these steps

Switch on the main dimmer power out the back

Slide up faders 1, 2 or 3. These are most likely patched and ready for mood lighting for a screening

IS IT WORKING?

Lights should work. If they don't check the patching on the dimmer or ask for assistance from a Production Support Specialist.

Patching Lights to the Dimmer  

Look at the grid to find the lights you like and note their grid power number.

Number 3 soft light is  good for dimmable lighting for class or video screening

Grab patch cable Number 3

Plug the chosen cable into the Jands WMX Dimmer - Note the Number on the Dimmer Panel

Slide up the numbered fader corresponding to the Dimmer Panel Number from the previous step, to the light level you desire.







  • No labels