FX6 - Accsoon Wireless Video Transmission
- Austin Russell
The Accsoon Cineview SE is a versatile wireless transmission kit that allows the FX6 camera team to transmit the camera’s HDMI output to at least one additional monitor and the production team, thanks to a smartphone app.
Accsoon Cineview HE Instructional Manual | 
|
|---|---|
Accsoon Cinview HE Troubleshooting | No picture is outputting wirelessly -Ensure that the Tx unit (You will see its designation below the screen on each unit) is connected to the FX6 via HDMI and the Rx is connected to the destination monitor. -Ensure that the channel wheel is the same on both devices. This wheel is found on the left of each device. -Load up the Accsoon App (Accsoon Go) and see if your smartphone is picking up the signal from the Accsoon Tx unit. -You should have recieved 2x HDMI cables with your Accsoon kit. Please swap the cables over to rule out a HDMI cable fault. *If none of the above implementations work, please return the kit to the MCASI Store for the team to inspect and diagnose. |