Cineroid LM400-VCD LED location light

Safety Precautions

Please observe the following safety precautions as they are meant for the safe and proper use of the product to reduce the risk of accidents.

• Only use with the supplied V mount battery.
• Do not look directly into the Led light.
• Check the safety of any light stands and use a sand bag
• Do not insert foreign objects into the product's electric or cable components.
• When using the product in an airplane or hospital setting, it is recommended to acquire authorization first as signals or electro-magnetic waves from the product may cause other equipment to malfunction.
• Do not store the product in a dusty or humid environment as damage may occur.
• When the product is mounted on a camera, do not lift or move the camera by grabbing the product. This may cause damage to the product or the camera mount.
• This product is not waterproof. If the product is dropped in water, contact the service centre immediately.

Parts

V mount Battery pack

Settings and Controls

1 Power On-OFF	2 Brightness Control	3 Channel Setting	4 Colour Temp.

Rear View

Variable Colour Temperature

• The unit is adjustable in 30 steps from 3,000 to 5,400K.
• Colour temperature adjustments are made via a knob on the back of the light unit.
• The colour temperature adjustment reads in 30 steps on the back of the unit.
• The unit's brightness level is adjustable in 30 steps.
• Dimming adjustments are made via a knob on the back of the light unit
• The brightness adjustment reads in 30 steps on the back of the unit.

Variable Brightness

• The unit's brightness level is adjustable in 30 steps.
• Dimming adjustments are made via a knob on the back of the light unit
• The brightness adjustment reads in 30 steps on the back of the unit.