Why aren't my cues recording or playing back properly?
Problem
The lights can be controlled, but cues aren't recording or playing back properly.
Solution
- Press "clear" in the live view.
- If the cue list is open (for plotting or editing), is there a red flashing warning that you are playing a different cue from the cue selected, with a yellow box around the fixture chooser (shown below)? If so, press "Link" to link the cue output and selection together, so you are always seeing the cue that you're editing.
- If the lights operate normally for the most part, but periodically black out, check the USB dongle is plugged in and glowing red.